Laboratory
Test Results
The overall performance of engines installed with 1Spark™ shows
tremendous results in comparison with engines without 1Spark™.
1Spark™
can produce an engine with Fuel Savings of 5 – 21% and increased
Power
Output of 3-67%. The test was adopted from GUNT CT 150 & CT
159. The
Gases Value Analysis, which uses the Muller Bern-Gas Analyzer, showed
that emission of Carbon Monoxide and Carbon Dioxide reduced from 3 –
10% while emission of Hydro Carbon reduced by 40-60%. These highlight
the fact that 1Spark™ is an
Environment friendly technology. The
analysis, which uses both instruments, was conducted using German
automotive technology.
Dynapack
Chassis Dynamometers Testing at Autotronic Engineering Facility at
Singapore.
The graphs
shows the standard power and torque in the same car without 1Spark
and with 1Spark.
RESULTS = The
Red Lines represent the stock horsepower and torque without using 1Spark
and the Higher Green Lines represent the engine installed with 1Spark.
Engine Performance and
Fuel Saving Tests -
RESULTS = Higher Power
Output and Lower Fuel Consumption.
Gas Value Analysis - Using
the Mueller Bern - Gas Analyzer -
RESULTS = Lower Carbon
Monoxide, Lower Dioxide and Lower Hydrocarbon for the engine using
1Spark.
|
1Spark
TM 
